Automatic assembly and screwdriver machine for electric parts HENS-SL2-C
Machine running video
https://www.youtube.com/watch?v=P3qGf5062TQ
https://www.youtube.com/watch?v=P3qGf5062TQ
I. Description
1. this machine is 8-station 2-axis turntable fixing screw machine, installed on the rotary table with 4 jig. Each turntable rotation to complete a product, each time feeding 2 pcs of screw.
2. screw dropping with fiber check, guaranteed the number of screws.
3. With automatic clutch screw driver, when the screws arrive to the torque will automatically stop, can determine the locking screw sliding, floating and other defective products, and displayed on the touch screen.
4. by replacing the fixture can be used for other models.
5. screw universal in the case of tooth size unchanged, different length is ok
6. Auto loading the product by vibrator bowl, after fitting 2 pcs screw the robot discharge product.
II. technical parameter:
Main parameter Structure |
Dimension |
1650*1350*1500 (H* L* W ) |
Power supply |
AC 220V 50HZ 300W |
|
Air supply |
0.6MPa |
|
Weight |
480kgs |
|
Structure |
Disk-driver |
Gear motor+ can splitter |
Rotary working |
8 working station. 1 products/workstation |
|
Discharge |
Manipulator unloading+ conveyor belt |
|
Control system |
Host control |
Siemens PLC + Touch screen |
Efficiency |
Screwing speed |
30-40pcs/min |
Screwdriver |
Screwing number |
2 pcs (1-16 axes optional) |
Torque |
Adjustable |
|
Screw |
Specification |
M1.2-M6.0,Cross, triangle and so on |
Detection |
Screw slip, screw omit screwing |
|
Displayed on the touch screen |
Advantages
1. The actual processing according to customer requirements with a single or multiple product lock screws.
2. lock screws can be flexible and change the number, when you need to do when the number is less than a predetermined number of screws, you only need the extra shielding lock screw mechanism on it.
3. on a machine by replacing the product will be able to fine-tune the fixture and doing other screws the same generic product.
4. can be installed according to the requirements of customers in a position to put the product safety light curtain, when the operator's hand into his lock screw area, the machine immediately stop the action before you can continue to be run by an operator to manually reset the device.
5. Screw driver arrive after automatic electric clutch torque will automatically ensure that each lock screws Vice torque control ± 10%.
6. main parts are die steel production, wear-resistant, anti-plastic deformation, equipment, body spray paint, oil and scratch resistant.
7. more humane touch-screen operation and ease of operation, external technical parameters and manual test function can be directly adjusted by technicians.